Things worth
printing, made
one at a time.

Faceted vase-mode shade that throws sharp diamond patterns across the ceiling. Fits standard 29mm and 43mm lamp rings.

• Vase mode
• Fits standard lamps

A spiral surface that appears to rotate as the light moves over it. Slow-printed for a genuinely smooth finish.

• Spiral finish
• Slow-printed

Variable wall thickness gives a lithophane-style glow gradient. Takes a standard LED tea light — no wiring, no electrician.

• LED tea light
• No wiring

A lithophane moon with real crater detail, on a minimal stand. Lights up warm — reads as a proper object, not a gadget.

• Lithophane
• Stand included

The high-detail version. Printed without supports so the surface stays clean the whole way round.

• High detail
• Support-free

A softer crescent take on the moon lamp — sits happily on a bedside table without dominating it.

• Bedside size
• Warm glow

A miniature telescope with swappable moon and sun lithophane discs. The most conversation-starting thing on this page.

• Swappable discs
• Multi-part

A tiny house silhouette lit from within. Good on a shelf, better as a gift.

• Shelf-sized
• Gift-friendly

Sharp crystalline facets that catch light differently through the day. Printed in one piece, watertight in vase mode.

• Watertight
• Single piece

Clean rounded pod with a fine ribbed wall. Quietly modern — works in a room that isn't trying too hard.

• Ribbed wall
• Several sizes

Angular cube geometry softened by vase-mode layer lines. Sits well in a group of three.

• Angular
• Groups well

Deep vertical ridges that hold shadow beautifully. The safe choice that still looks considered.

• Deep ridges
• Best seller shape

A cheerful face pressed into the side. Works as a planter, a vase, or a pen pot — and makes people smile, which is the point.

• Cheerful
• Multi-use

24cm tall, widening toward the rim so it stays stable. Doubles as a cache-pot over an ugly nursery container.

• 24cm tall
• Cache-pot

Stepped terraces modelled on real bismuth crystal growth. Genuinely strange in the best way.

• Stepped terraces
• Statement

Three angled cups for pens, scissors and the things that never have a home. Prints clean with no supports.

• Three cups
• No supports

Separate slots for pens and markers plus an open tray for clips, sticky notes and the stapler. Open front so you can grab without looking.

• Slots + tray
• Open front

Clamps to the desk edge and holds any cup or bottle under 100mm. One-piece print with a built-in locking mechanism.

• Clamps on
• Under 100mm

A plain, well-proportioned pen pot. Nothing clever — it just looks right on a desk and costs very little.

• Simple
• Quick print

Your name — or anyone's — moulded into the front. Easily the best desk gift on this page.

• Personalised
• Gift

Separate units you combine to fit your desk, each printable in its own colour. Start with two, add more later.

• Modular
• Mix colours

A small-footprint holder for a tight desk or a shelf. Prints in well under two hours.

• Small footprint
• Under 2 hrs

A fully poseable figure with reinforced arm and thigh joints. Prints assembled — it moves the moment it comes off the bed.

• Fully poseable
• Print-in-place

Every segment moves. The one thing guaranteed to get picked up off your desk by everyone who walks past.

• Fully flexible
• Desk favourite

The multi-colour build — printed in two or more filaments so the scales and belly contrast properly. Still fully articulated.

• Multicolour
• Articulated

Print-in-place rubber band blaster. No glue, no screws — it comes off the printer ready to fire.

• Print-in-place
• No assembly

Prints as a few parts that snap together without glue. Chunkier and more satisfying in the hand than the one-piece version.

• Snap-fit
• No glue

The original print-in-place design. Simple mechanism, very hard to break, endlessly reloadable.

• Print-in-place
• Hard to break

The improved revision — tighter tolerances, almost no post-print cleanup. Off the bed and firing in seconds.

• Improved tolerances
• Zero cleanup

Built to print on small beds. No springs, no metal parts, standard rubber bands — the cheapest way to make a kid's afternoon.

• Small bed OK
• All plastic

The classic pistol silhouette with a clean trigger action.

• Classic shape
• Clean trigger

Pure printed plastic and two rubber bands — one for the trigger, one for the magazine. Shoots roughly 30 feet.

• ~30 ft range
• Magazine fed

Pocket-sized with a thickened trigger for durability. Prints in one go, fits in a party bag.

• Pocket-sized
• Party favour

Fluted holders in three heights that throw a ribbed shadow up the wall. Takes an LED tea light — never a real flame.

• Three heights
• LED tea light

Printed stems that never need water and never drop petals. Drop them into a vase you own, or one from further up the shelf.

• No water
• Mix colours

A soft-edged bowl for keys, coins and whatever collects by the door. Quiet shape, matte finish, no sharp corners.

• Matte finish
• By the door

A shallow dish with a bubbled rim. Prints flat without supports and comes off smooth enough to leave exactly as it is.

• Support-free
• Smooth finish

A clean-lined Ganapati silhouette for a wall or a shelf. One colour, or two if you want the outline to lift off the background.

• Wall or shelf
• One or two colours

A standing holder that keeps a rosary untangled and off the bedside table. Weighted base, no fixings, no drilling.

• Free standing
• No fixings

Six coasters, each cut with the outline of a famous racing circuit. Two-colour printed so the track reads clearly against the base.

• Set of six
• Two-colour

An abstract figure study drawn in one continuous curve. Reads as a small sculpture rather than a printed model.

• Abstract
• Single piece

Winds a MacBook charging cable down to a tidy loop and grips the end so it stops unravelling. Two designs, same job.

• Two designs
• Cable tidy

A small insert that wraps an earbud cable without kinking it, sized to drop straight into a standard carry case.

• Case insert
• Kink-free

A small stand that keeps a pair of earbuds upright and visible instead of tangled at the bottom of a drawer.

• Keeps them upright
• Small footprint

Headset on top, controller below, in one printed piece. Two versions depending on how much desk you can spare.

• Two versions
• One piece

A one-piece stepped stand for die-cast 1:64 cars. Prints without supports and lines up neatly alongside more of the same.

• One piece
• Support-free

Display replicas from the Cyberpunk 2077 armoury, printed in parts and assembled. Solid props for a shelf — nothing moves, nothing fires.

• Display prop
• Multi-part

A seated figure posed to sit on a shelf edge, printed in parts so the overhangs stay clean. Supports cleaned off by hand.

• Sits on an edge
• Hand finished

A standing character figure with fine surface detail. Printed slowly at a low layer height — the long one on the printer.

• Fine layers
• Slow print

Layered profiles of three icons, mounted flat against the wall. Printed as separate colour plates and stacked — no paint anywhere.

• Wall mounted
• Layered colour

A pack of drawing stencils for journals and planners — shapes, borders, little icons. Thin flat prints that stay flat.

• Full pack
• Quick print

Holds a standard sticky-note pad and doubles as a stencil edge. Two takes on the same idea — pick whichever suits your desk.

• Fits standard pads
• Two designs

A print-in-place fidget that clicks through a detent as it turns. Comes off the plate already assembled — nothing to glue.

• Print-in-place
• No assembly

Flip-action fidget with a blunt printed blade — no screws, no metal, nothing sharp. Prints as a single piece.

• No screws
• Blunt by design

A multi-part skull that snaps together from separately printed panels. Best in two contrasting filaments so the seams read as lines.

• Multi-part
• Snap-fit

Card-sized sheets that pop out and assemble into a small vehicle. Flat enough to post, fiddly in the best way.

• Card sized
• Pops out